Installing T5 Tubes

Installation Instructions: 


1) Switch off the electricity 

2) Detach the conventional lamp from the fitting by turning is 90 degrees. 

3) Remove the conventional lamp. 

4) Insert the LEd Tube into the lamp fitting. 

5) Secure it in position by turning the LED tube 90 degrees. 

6) Switch on electricity.


Please note- This tube should not be installed with a direct connection to an AC source. 

This tube is compatible with electronic ballasts. Please refer to the following list of ballasts: 


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request



Please sign in to leave a comment.